The Motronic system (also called the Digital Motor Electronics or DME) is hands down the best overall fuel injection system that you can use when you consider price and performance. Ignition timing and fuel delivery are all controlled by a digital map that is recorded in a removable...
Installing M3 Exhaust
Tools Required
Jack stands
Metric wrenches, sockets (12mm,13mm)
Bentley or Haynes manual
Facilities Needed
Level surface
Parts Required
M3 exhaust (about $200 used, $800 new)
Jack stands
Getting Started
Stock E36 6-cylinder pipes sound good upon start-up and idle but raspy under acceleration, and create a strong resonance – mainly for back seat passengers – at certain throttle positions. Installing an M3 exhaust will make the engine sound smooth and quiet throughout the...
DME PERFORMANS CHİP...
BMW E 36 Removing the D...
Step 1: Remove Mirror Adjustment Switch
Using a flathead screwdriver, carefully pry the mirror adjustment switch out of the door panel. Optionally disconnect the wiring harness.
Fig 1: Mirror adjustment switch (removed).
Step 2: Remove Inside Door Handle Trim
The door handle trim...
M3 V8’s E92 M3...
Sparkling Graphite E92 M3 on BBS LM. The wheels are 20×9 et15 and 20×10 et20 with a 12mm in the rear. Tire sizes are 245/30/20 and 275/30/20. The car is lowered on compressed H&R springs. The front lip is from 3D.
The car looks super clean. BBS LM just never gets old. I would...
G-POWER M6 HURRICANE CS...
Creating the ultimate BMW, nothing less was the set target for the G-POWER engineers when they started to designe the G-POWER M6 HURRICANE CS.
The starting basis for this project is the currently most exclusive model in the BMW product range, the BMW M6. Due to the combination of...






